Tunnel / Bridge / Making Machine , Construction Reinforced 1200mm Wire Mesh Equipment

Automatic Reinforcing Mesh Welding Machine Making Reinforcing Mesh In Tunnel / Bridge / Road

Description

automatic wire mesh welding machine is complete equipment for welding wire mesh, which is manufactured by AWM based on learning foreign advanced experiences and advanced technologies in addition to actual production demands in the international market. It has many favorable features, such as high output, high precision, easy modification, low operation failure rate, strong capability in energy saving, low consumption, and high quality.

Features

1. The machine is used for wire diameter 5-12mm, it is an automatic equipment that desiged and manufactured by ourselves. This machine is driven by pneumatic system and composed of line wire support system, water cooling welding transformer, pneumatic control cross wire falling system, servo motor pulling mesh device.

2. The machine uses PLC touch screen control technique, we use Japan, Sony digital control system which can be input to touch screen control panel to adjust the mesh size, so it can weld different mesh size on the same mesh panel .

3.Water-cooling transformer and water-cooling lower electrodes to make sure the welding firm during a long working time, and prolong the service life.

4. Feeding and Welding System Cross wire feeding: Firstly, the coil wires are straighten and cut into fixed length by straightening cutting machine, which become weft wire. Then worker put the weft wires into wire hopper. Wire hopper under the control of step motor, the weft wires falling automatically one by one
Line wire feeding: warp wires are the same to weft wires, firstly use straightening cutting machine to straighten and cut coil wire into fixed length. Then the line wires are sent by labor and fed automatically, when it welding and drawing, labors can prepare the wires, it increases the production efficiency.

5. Welding system: the machine welding system is controled by pneumatic system, which makes the adjusting of welding pressure simple and convenient. At the same time, the welding electrodes are equipped with water cooling system to make sure the welding during a long working time, and prolong the life .

6. The mesh pulling system is controlled by step motor, which makes the pulling mesh aperture more standard

and accurate.

7. Mesh falling system: Automatic falling mesh panel system is adopted, so it save much labor to move the mesh panels.

parameter

Usage

Products are widely used in the floor &wall reinforcing mesh in the building,reinforcing mesh in the tunnel,bridge and road.

steel grating welding machine

rebar mesh welding machine

Tunnel / Bridge / Making Machine , Construction Reinforced 1200mm Wire Mesh Equipment Images